50cm Full Stainless Steel Bird Spikes | 304 & 60 Pins

50 cm strip / 30 pairs / 304 base and pins / unassembled

These full stainless steel bird spikes use a 304 stainless steel base as well as 304 stainless steel pins. The 50 cm strip carries 60 pins in 30 pairs and is supplied unassembled for balcony rails, roof edges, parapets, ledges and equipment frames.

What does “full stainless steel” mean?

In this specification, both the pins and the mounting base are made from 304 stainless steel. That differs from many bird spike strips that use stainless steel pins with a clear PC or plastic base. The all-metal construction is relevant when a buyer has specified a stainless steel base for appearance, service life or the installation environment.

Selection note: 304 is a general-purpose stainless steel grade. Coastal, high-chloride or chemically aggressive sites may require a different grade; confirm exposure conditions and maintenance requirements before ordering.

Where a 50cm full stainless strip fits

Plan the mounting and coverage

1. Measure the full landing area. Include depth, corners and returns rather than counting only the visible front edge.
2. Inspect the substrate. Select a mechanical fastener or fixing approved for masonry, wood, metal or the actual mounting surface.
3. Dry-fit each strip. Mark fixing points, trim where needed and close gaps that could leave a usable foothold.
4. Keep services clear. Do not block drains, ventilation, window movement, lighting access or roof inspection routes.
5. Inspect after installation. Recheck fixings and coverage after severe weather, especially near loose panels or moving equipment.

For live electrical equipment or areas controlled by a utility, isolate the work and use the site owner’s approved method and access plan. Do not mount on or near live conductors without the relevant authorization.

50cm full stainless steel bird spike specifications

Packing check: the supplied product data lists a 53.2 × 11.2 × 5 cm inner box and 12 sets per outer carton at approximately 16.57 kg. Confirm the final set count, labels and export packing in the quotation.

Unassembled, assembled or narrower alternatives

This draft format arrives unassembled. It can suit distributors and project buyers who plan their own assembly, packing or private-label workflow. Compare assembly labour, carton use and the landed cost against assembled formats.

For a clear PC base, compare our 50cm 304 stainless steel range. For another strip format, see the 50cm 3+2-pin stainless steel bird spikes. Both pages explain how the base options differ from this full-metal model.

Frequently asked questions

Is the entire strip stainless steel?

Yes. The supplied specification states a 304 stainless steel base and 304 stainless steel pins. This product should not be confused with versions that use clear PC bases.

What do 30 pairs and 60 pins mean?

Each 50 cm strip contains 30 pairs of pins. The two sides of each pair create a crossed pattern intended to make the protected surface unsuitable for landing.

Can the fixing method be customised?

The base has multiple pre-drilled mounting points. The appropriate screw, anchor, clamp or fixing method depends on the substrate, wind exposure and site rules; confirm it with the installer and supplier.

Wholesale full stainless bird spike supply

Anti-Birdspikes coordinates stainless steel product sourcing, inspection and export packing from Yantai. Send the strip quantity, pin count, base requirement, destination country and sample needs so the quotation reflects the correct model rather than a generic “stainless steel” description.

Request 50cm full stainless pricing

• Emailwinnie@anti-birdspikes.com
  info@anti-birdspikes.com
• WhatsApp / phone+86 132 0535 1335
• FactoryYantai, Shandong, China
  www.anti-birdspikes.com

Reviewed by the Anti-Birdspikes product team, November 7, 2026. Specifications are based on the supplied product data. Confirm fixing suitability, final packaging and site conditions before ordering.