Tall Bird Spikes 10cm | Flexible Black PP 44.7cm Strips
These tall bird spikes use a 10 cm spike height with flexible black PP bases. Each 44.7 cm strip can be bent, cut and joined to create a physical barrier on roof edges, ledges, railings, balconies, planters and garden borders.
- Tall 10 cm spike profile; 44.7 x 7.2 cm base
- Flexible, modular black polypropylene strips
- Approximately 83 g per strip for practical handling
- Wholesale, project supply and OEM discussions available
Tall 10 cm spike height / flexible black PP / modular 44.7 cm strips
These tall bird spikes combine a 10 cm spike profile with flexible black polypropylene bases. Each modular strip measures 44.7 cm long, so distributors, installers and maintenance teams can bend, cut and join sections for ledges, roof edges, balconies, railings and other exposed bird-landing surfaces.
What are tall bird spikes?
Tall bird spikes use a higher vertical spike profile than low-profile strips. This product measures 10 cm from the base to the tip. These black plastic bird spikes use crossed spike groups and a 7.2 cm base width to create a physical exclusion zone intended to make landing and roosting less comfortable for pigeons and other birds.
The product is a barrier, not a trap, poison or chemical repellent. Its rounded plastic tips reduce sharp edges, while the polypropylene construction is lightweight and will not rust. No bird deterrent can guarantee complete exclusion: results depend on the target species, approach angles, the amount of open foothold and whether drains, vents or nearby ledges provide an alternative landing place.
Why specify a 10 cm tall bird spike?
The 10 cm height gives these 10 cm bird spikes a more substantial exclusion profile than shallow, decorative strips. That can suit larger landing surfaces and locations where birds approach a protected edge from the side or settle on a wide parapet. Height alone does not determine performance, however. Spike spacing, base width, fixing strength, continuous coverage and the geometry of the building all affect how difficult the surface is to use.
For specification work, compare the spike profile with the bird pressure and the available landing area. On a broad ledge, a single row may leave an open foothold behind the product. On a narrow railing cap, a continuous row aligned with the fixing surface may be enough. Inspect the site rather than choosing from dimensions alone.
Flexible bird spikes for roofs, balconies and ledges
Use these flexible bird spikes on sound ledges, railings, roof edges, parapets, balcony borders, planters, vehicle roof rails and garden structures where birds currently gather. The bendable base follows gentle curves, while the modular ends allow adjacent sections to be joined into longer runs.
Common applications include roof edge bird spikes, balcony rails, parapet caps, air-conditioner surrounds and protected planter borders. Keep drains, gutters, vents, moving parts and emergency access unobstructed. Do not span surfaces that require frequent maintenance access, and do not rely on adhesive alone where wind uplift, heat or surface texture makes the fixing insecure.
For balcony bird spikes and roof installations, check local safety requirements and access procedures before work begins. Fixings and installation accessories must be selected for the actual substrate; they are not assumed to be included unless confirmed in the quotation.
How many 44.7 cm strips do you need?
Begin with the full linear length to be protected, then add allowance for corners, trimming and connector alignment. One strip covers approximately 0.447 m. Twelve strips cover about 5.36 m along a straight run before cutting waste. For a broad ledge, check whether one row covers the full landing depth or whether an additional row is needed behind it.
| Straight run | Measure the edge end to end; include both returns at corners. |
|---|---|
| One strip | 44.7 cm nominal length before cutting or connector adjustment. |
| Twelve strips | Approximately 5.36 m on a straight run before waste. |
| Broad ledges | Check the remaining landing depth and add rows where a foothold remains. |
Technical specifications
| Product | Tall black PP bird spikes |
|---|---|
| Catalogue SKU | PP-BLK-447-10 |
| Strip dimensions | 44.7 cm long x 7.2 cm wide x 10 cm high |
| Weight | Approximately 83 g per strip |
| Material | Polypropylene (PP) |
| Colour | Black |
| Spike layout | Crossed groups with rounded plastic tips |
| Form | Flexible modular strip |
| Typical use | Ledges, railings, roof edges, parapets, balconies, planters and garden borders |
Installation and surface preparation
- Clean and inspect the surface. Remove loose dirt and check that the intended edge is sound and suitable for fixing.
- Plan the full landing area. Cut sections where needed and test the layout before fixing. Protect corners and close unused landing space behind the strip.
- Join the strips. Align the pin tabs with the matching cap slots and press down firmly until the modular sections lock together.
- Secure the run. Use an adhesive, ties or mechanical fixing appropriate for the substrate. Seal any drilled penetration and introduce no trip or fall hazard.
- Inspect after installation. Check for movement, missed gaps and blocked drainage. Re-check fixings after severe weather or routine maintenance.
Wholesale tall bird spikes and project supply
These modular strips are suited to distributor stock, property-maintenance programmes, pest-control installers and project purchasing. We can discuss quantity schedules, colour requirements, packaging, private-label information and sample requests through the quotation process. The 10 cm profile can sit alongside our wider bird spike range so buyers can compare plastic, stainless steel and clear PVC options.
For an accurate manufacturing quotation, send the protected linear length, number of rows, target bird issue, typical mounting surface, expected order quantity, packing requirements and delivery country. MOQ, fixing accessories, customisation options and lead time depend on the final order and should be confirmed on the proforma rather than assumed from the product photographs.
Frequently asked questions
What does “tall bird spikes” mean in this listing?
The spike profile is 10 cm high from the base to the tip. Each complete strip measures 44.7 cm long and 7.2 cm wide, weighs approximately 83 g and is made from black polypropylene.
Are 10 cm bird spikes suitable for pigeons?
They are designed as a physical barrier for pigeons and other birds, but suitability depends on how the birds use the surface. Check the full landing depth, approach route and fixing condition. A broad ledge or nearby alternative perch may require more rows or additional bird-control measures.
Can the strips be bent and joined?
Yes. The flexible base can be shaped around gentle curves, while matching connector tabs allow adjacent sections to be pressed together. Sharp folds and forced bends should be avoided.
Are the plastic tips designed to injure birds?
They are rounded plastic tips intended to make an edge physically difficult to land on. The product does not use chemicals, bait or trapping, but it is still a physical barrier and should be installed securely away from children and pets.
Do bird spikes guarantee that birds will leave the area?
No physical deterrent guarantees complete exclusion. Results depend on bird species, the available approach, coverage and nearby alternative perches. Inspect the installation and close any remaining footholds where necessary.
Are adhesive, screws or installation tools included?
Do not assume accessories are included from the product photographs. Tell us the substrate and project requirements when requesting a quotation so the fixing method and any available accessories can be confirmed.
Request pricing and samples
Send the protected length, mounting surface, quantity and delivery destination.
| Strip length | 44.7 cm |
|---|---|
| Base width | 7.2 cm |
| Spike height | 10 cm |
| Weight | Approximately 83 g |
| Material | PP |
| Colour | Black |
| Design | Flexible modular crossed spike strip |
Related products
