Solar Bee and Wasp Trap | Hanging Orchard Insect Catcher

Solar lid / hanging trap / orchard and farm insect monitoring

This solar bee and wasp trap combines a translucent collection chamber, coloured entry top and wire hanger in a compact 11.8 × 9.8 cm format. It is made from PP and AS and shown with a solar panel and integrated light in the lid. The format is intended for orchard, farm, garden and outdoor-area users who need a reusable hanging trap that can be inspected regularly.

What is a solar bee and wasp trap?

A solar wasp trap is a hanging insect catcher that combines an entry opening, a collecting container and an attractant strategy. This model presents a circular entry port on its side and a translucent lower chamber that lets the user check activity. The solar panel and internal lights shown on the lid provide illumination as an additional visual lure.

The term “bee and wasp trap” describes the market category and search use; it does not mean that the product identifies insects or catches only one species. Use it only where a target pest has been confirmed, follow local environmental and pest-management requirements, and keep it away from managed pollinator habitats during flowering and pollination periods.

Responsible-use note: insects cannot be reliably identified from the product name alone. Check your target species and local advice before use. Do not place attractant traps near honey-bee hives or crops while pollinators are active.

Product features

How the hanging insect trap works

The trap is positioned around the target activity and prepared with an attractant appropriate to the species and local rules. Insects that enter through the side port collect in the translucent chamber, where the user can inspect the contents without dismantling the whole product. The solar light can make the top of the trap visible after dark when it receives enough daylight to operate.

The effective attractant, trap height and placement spacing are not universal. They depend on the pest, crop, weather and stage of the season. A trap is a sampling and population-management tool, not a complete solution for fruit damage or a guarantee that every target insect will be captured.

Do not infer a capture rate from the product photo. The number of insects shown in promotional imagery is illustrative. Ask for the current product datasheet if a tender or retail listing requires light-output, battery or attractant specifications not listed here.

Orchard, farm and garden applications

This hanging trap can be considered around orchard rows, berry gardens, mixed fruit plots, plant nurseries, farm buildings and domestic growing areas where pest pressure has been identified. Hang it in a stable position with enough clearance to inspect the chamber and remove it safely. Keep the opening clear of leaves, irrigation lines and dense foliage.

For commercial orchards, record trap locations and check dates so that findings can be compared over time. Place traps in representative monitoring zones rather than concentrating several units at one visible hotspot. Keep records of target insects, bycatch, cleaning frequency and crop observations so that the trap is used as part of a broader integrated pest management plan.

Pollinator safety and placement

Attractant traps can capture non-target insects. Before hanging the product, confirm the main pest, check whether beneficial insects are active and review local guidance. Avoid sweet attractants where bees are foraging, keep the trap away from hives and flowering crops during pollination, and use a covered or labelled container when emptying it.

Do not use homemade baits containing prohibited substances or ingredients restricted in the destination market. The trap photographs supplied for this listing do not specify an attractant formula. Any bait, scent lure or liquid used with the trap is the buyer’s responsibility unless a compatible attractant is separately confirmed in the quotation. The U.S. EPA integrated pest management principles provide general guidance on combining monitoring, prevention and treatment rather than relying on one method.

How to install and maintain the trap

1. Confirm the target. Identify the insect problem and check local restrictions before selecting a bait or placement area.
2. Choose a stable support. Select a branch, wire or frame that can safely carry the filled trap and is away from hives, paths, food and children.
3. Prepare only the required amount. Follow the attractant instructions that apply to the target species. Never mix unknown chemicals.
4. Hang with clearance. Suspend the trap so the entry port remains open and the body cannot blow against people, animals, machinery or irrigation equipment.
5. Check the solar exposure. Put the solar panel toward daylight. The runtime, charging performance and battery specification are not stated in the supplied sheet and must be confirmed before making a claim.
6. Inspect and clean regularly. Use gloves, empty the chamber safely and wash the trap according to the attractant instructions and local waste rules. Replace damaged lids, wires or bodies.

Sizes, colours and packing

Small dimensional differences can occur in production. Confirm the final drawing, plastic grade, colour tolerance and carton specification before approving a retail or OEM order.

Factory production and wholesale supply

Anti-Birdspikes is a garden and pest-control product supplier based in Yantai, China. For this solar trap range, factory-side planning covers moulded body and lid components, solar and LED assembly, colour variations, inspection and export packing. We work with distributors, garden-product importers, farm suppliers and private-label buyers through quotation-based bulk orders.

• Development review: send the destination market, target pest, expected use and any required solar or battery specification.
• Colour planning: compare yellow, orange and green options against your shop range or carton plan.
• Packaging: review 1-piece or 2-piece packing, neutral cartons, printed labels and instruction sheets for qualified orders.
• Quality control: inspect appearance, lid fit, entry port condition, hanging wire, printing and pack quantity against the approved sample.
• Repeat supply: retain the approved sample and specification so later batches are compared against the same reference.

Minimum order quantity, unit price, lead time, battery specification and customisation availability depend on the final configuration. These details are confirmed in the quotation and proforma invoice rather than inferred from this product page.

Compare garden insect-control formats

Hanging attractant traps suit monitoring and reducing local adult insect activity. A hanging fly trap bottle uses a different entry and collection format, while a solar bird repeller addresses bird pressure rather than insects. Browse the full Garden Supplies category or tell us the target pest and site so that the appropriate format can be reviewed.

Frequently asked questions

Request wholesale pricing

Product information reviewed by the Anti-Birdspikes product team, October 31, 2026. Specifications are based on the supplied product photographs and product-information sheet. Confirm final material grade, solar configuration, attractant compatibility, packing and market compliance before bulk production.