Ultrasonic Bird Repeller | YTZK-01 Solar Owl Deterrent

PIR sensing / six modes / flashing LEDs / solar and USB charging

The YTZK-01 ultrasonic bird repeller combines a motion-triggered ultrasonic output, flashing owl eyes and optional alarm sound in a ground-stake housing. Six settings provide different frequency bands and visual patterns for gardens, yards, farms and building surrounds. A solar panel supports charging, with USB available as a direct power option.

What is an ultrasonic bird repeller?

An ultrasonic bird repeller emits high-frequency sound outside the normal adult human hearing range, often together with light or motion response. The YTZK-01 adds PIR sensing so the main output begins when movement is detected. Its owl silhouette and flashing eyes provide a visual deterrent, while optional alarm sound expands the modes for different sites.

The product cannot guarantee that every bird will leave or stay away. Bird species, season, habituation, alternative food and shelter, line of sight and placement all influence results. Treat the unit as one part of a site-specific bird-management plan rather than a replacement for proofing, netting, sanitation or other measures where those are appropriate.

How the YTZK-01 senses and responds

The listed frequency ranges include 9–20 kHz, 18–27 kHz and 25–70 kHz combinations, with variable-frequency and strong-flash choices in the six-mode design. Start with the least disruptive visual and ultrasonic setting that suits the site. Do not assume that a higher frequency, a louder sound setting or continuous operation will always produce a better result.

YTZK-01 product specifications

Solar performance depends on daylight, season, panel orientation and battery condition. Do not assume that a panel will keep the unit charged under thick shade or in prolonged cloudy weather. Use USB charging when the battery is low and follow the final product instructions for charging time and storage.

Where to place the owl bird repeller

Place the stake on firm ground where the head is visible from the area birds use and where the solar panel receives direct daylight. Aim the sensor and speaker toward the movement or landing area. Keep the unit out of walkways, play areas and machinery paths, and make sure it cannot fall into water or strike people during strong wind.

• Use in gardens, yards, orchards, farm margins and building surrounds where movement is expected.
• Keep vegetation from blocking the sensor, sound opening and solar panel.
• Do not rely on one unit to cover a large or obstructed area.
• Observe results for several days and rotate placement if birds become accustomed to it.

Positioning should follow the bird behaviour being addressed. If birds land on a roof edge, structure or netting line, a device on the ground may have a limited line of sight. Combine the repeller with suitable proofing or habitat changes when the site requires a more direct physical barrier.

Responsible use around people, pets and wildlife

Ultrasonic equipment can affect animals differently. Keep people and pets from repeatedly entering the active sensing area, and do not aim the unit at bedrooms, kennels, stables or confined animal areas. If the audible alarm mode is used, consider neighbours, working hours and local noise requirements. Discontinue use if a person or animal shows distress or the installation creates a hazard.

Weather and electrical caution: the supplied sheet does not state an ingress-protection rating. Keep the charging port closed and the unit protected from immersion. Inspect the housing, panel and stake after storms. Do not modify the battery, speaker or electrical assembly.

How to install and maintain the device

1. Charge before first use. Use the specified USB input and let the unit complete an initial charge.
2. Assemble the stake. Join the sections fully and push only the pointed lower section into suitable ground.
3. Aim the sensor. Face the owl head toward the monitored flight path or landing area.
4. Select a mode. Begin with a suitable visual and ultrasonic combination; use alarm sound only where permitted.
5. Check power and movement. Confirm the panel faces daylight and the sensor is not blocked by plants.
6. Inspect regularly. Clean the panel, check the stake and recharge the battery when required.

Avoid pressing or handling the unit with wet hands. During long storage, charge the battery according to the final instruction sheet rather than leaving it fully discharged. Remove debris from the speaker opening and inspect for cracks or loose parts.

Ultrasonic repeller, visual deterrent or physical bird spikes?

For fixed landing surfaces, compare our bird spikes category. For moving visual deterrence in orchards or gardens, explore reflective bird scare rods or a solar ultrasonic bird repeller series. The right solution depends on where birds land, feed, roost or approach the site.

Factory supply and private-label production

Anti-Birdspikes supplies the YTZK-01 for wholesale and private-label review. Product planning can cover housing colour, printed logo, retail box, instruction-sheet language and plug or charging accessories where applicable. Approved samples should be checked for sensor response, speaker output, LED movement, stake fit and charging indicators.

Send the destination country, quantity, packaging requirements and any local electrical or labelling requirements with the enquiry. MOQ, price, lead time and custom options are confirmed against the selected order rather than inferred from the catalogue photograph.

Frequently asked questions

Request a wholesale quotation

Product information prepared by the Anti-Birdspikes product team in Yantai, China. Specifications are based on the supplied YTZK-01 sheet and photographs. Updated November 2, 2026. Confirm final battery specification, weather requirements, packaging and local-use conditions before bulk purchase.