Transparent Humane Mouse Trap | MYMT Live Catch Cage

Live catch / transparent body / two lengths / wholesale supply

This transparent humane mouse trap captures a mouse inside a clear cage instead of striking it. The MYMT series combines a one-way entrance, internal trigger and visible catch chamber so users can check the trap without opening it. Two lengths cover cabinets, equipment edges, wall runs and general indoor mouse routes.

What is a transparent humane mouse trap?

A humane mouse trap is a live-catch device designed to contain a mouse until a person can transfer it. This transparent model adds a clear acrylic body, ventilation holes and a visible trigger so the user can check whether an animal has been caught. Humane capture depends on frequent inspection, calm handling and correct release in line with local rules; the trap itself cannot guarantee the animal remains unharmed.

The one-way entrance and internal trigger are the two parts that control capture. A mouse enters through the arched opening, travels toward the trigger plate and activates the door behind it. The transparent body then reveals the mouse and the condition of the mechanism.

MYMT-01 and MYMT-02: which size fits your space?

The shorter MYMT-01 is easiest to fit into tight gaps where a 31.2 cm body would block access or stand out. The MYMT-02 is the better starting point where the route follows a wall or shelf length and there is enough clear floor area. Measure both the opening and the flat resting area before ordering a mixed wholesale carton.

How the one-way entry and trigger work

Set the trap only after checking that the door moves freely and the trigger is not blocked by dirt, packaging fragments or bait. Do not force the mechanism. A reduced-travel door or a trigger that fails to reset is a reason to withdraw that unit and inspect it before use.

Where to place a live catch mouse trap

Mice commonly travel close to walls, cabinet bases, stored goods and service openings. Place the trap lengthwise beside a wall or edge with the entrance facing the likely approach. Keep it on a stable surface. Avoid narrow positions where a person cannot reach the cage safely or where the trapped animal could be exposed to heat, machinery, pets or children.

• Inspect previous droppings, gnaw marks and movement routes before choosing a location.
• Use multiple safe checkpoints rather than assuming one unit covers a whole building.
• Keep the cage level and leave enough clearance for the door to operate.
• Move the trap if it remains untouched after a reasonable monitoring period.

Food, waste and accessible nesting material can keep activity away from the trap. Use exclusion and sanitation alongside trapping so the underlying rodent pressure is not sustained. For an established infestation, a site-specific pest-management plan may be more appropriate than a single device.

Baiting and setting the trap

The supplied product is a physical live-catch cage and does not specify a bait formula. Use only food or a small scent lure that is appropriate for the site and legal in the destination market. Chocolate, peanut butter, seeds or a small piece of dried food are common options in general rodent control, but first check allergies, food-safety requirements and local advice.

1. Inspect the cage. Confirm that the entrance, door, trigger and handle are undamaged.
2. Prepare a small lure. Place a modest amount where it encourages entry without blocking the trigger.
3. Set and test the mechanism. Follow the approved product instructions and confirm the door closes smoothly.
4. Place the entrance toward activity. Keep the body against a wall or edge where practical.
5. Check frequently. A live trap should not be left unattended for long periods.

Do not use glue boards or poisons inside a live-catch cage. Keep the mechanism clear and use the product only for its intended live-capture purpose.

Checking, transferring and cleaning

Put on suitable gloves before handling the cage. Check the trap quietly, confirm the door is secure and move the whole cage slowly to avoid shaking it. Release or transfer the animal in accordance with local wildlife, public-health and property rules. Never release a rodent into a building, food area, protected habitat or another person’s property, and do not relocate an invasive species.

After use, remove bait and debris, wash the surfaces with a suitable detergent and disinfect according to local hygiene guidance. Dry the cage completely before resetting it. Inspect hinges, the door and trigger for wear. Clean the area around the capture point and continue looking for entry gaps, food sources and nesting material.

Humane trap, snap trap or ultrasonic repeller?

Product choice should follow the site and legal requirements. Compare this cage with our press-trigger rat and mouse traps, an ultrasonic mouse repeller, or browse the broader rodent trap category. For a building project, consider combining inspection, exclusion and sanitation with the selected capture method.

Factory production and wholesale supply

Anti-Birdspikes supplies clear live-catch mouse traps from Yantai, China for distributors, hardware ranges, pest-control sellers and private-label buyers. Production and packing can be reviewed around the chosen model mix, carton quantity, label artwork and instruction-sheet language for qualified orders. Sampling is recommended before approving a retail programme.

• Model mix: combine the short MYMT-01 and long MYMT-02 in one wholesale plan.
• Private label: review logos, labels, carton marks and instruction sheets for qualified orders.
• Inspection: check the clear body, door movement, trigger reset, handle and packaging.
• Project details: include target market, expected quantity, packaging and delivery destination.

Minimum order quantity, unit price, packing quantity and lead time are confirmed in the quotation. Product photographs and dimensions do not imply a universal stock level or delivery schedule.

Frequently asked questions

Request pricing and a sample

Product information prepared by the Anti-Birdspikes product team in Yantai, China. Specifications are based on the supplied MYMT product sheet and product photographs. Updated November 2, 2026. Confirm final material, packaging, order quantity and local-use requirements in the quotation.